FAAC
Illuminated Hose Connection Kit for FAAC 615 Barrier
Illuminated Hose Connection Kit for FAAC 615 Barrier
Couldn't load pickup availability
Envío desde México: llega en 3 a 9 días hábiles.
Pago seguro: tarjeta, PayPal o Mercado Pago. Precio con impuestos incluidos y factura CFDI.
¿Dudas? Pregúntanos por WhatsApp y te respondemos.
Illuminated Hose Connection Kit for FAAC 615 Barrier (model 390081). Part of our Access Control line for managing who enters offices, buildings, residential developments and car parks. Price incl. VAT and stock available in Mexico.
Features and specifications
Key Features
- Adapter card for efficient lighting
- Connector cable compatible with LED hose
- Compatible with FAAC 615 barriers
- Compatible with FAAC red LED hose
- Additional accessories available separately
Kit contents
- 1 x Adapter card for lighting
- 1 x Connector cable for LED hose
Additional Accessories
- 390993 FAAC red LED hose
Compatibility
- FAAC 615
- 1049062
Installation Precautions
- Disconnect the power supply before making connections
- Use a residual-current circuit breaker with an appropriate threshold
- Keep power cables separate from control and safety cables
- Use separate conduits or shielded cable with the shield grounded
Automation Testing
- Check correct operation after programming
- Check that safety devices activate correctly
- Check the signaling diodes
- Check the condition of the limit switches
Logic Programming
- 1 Press: B/C logic (Mixed B/C)
- 2 Presses: B logic (Semi-automatic B)
- 3 Presses: C logic (Operator Presence)
- 4 Presses: EP logic (Semi-automatic step-by-step)
- 5 Presses: AP logic (Automatic step-by-step)
- 6 Presses: P logic (Parking)
- 7 Presses: A logic (Automatic)
Dimensions and Components
- Connector J1: Terminal block for inputs and accessory power supply
- Connector J2: Connector for radio receiver
- Connector J3: Operating mode selection 596 or 615
- Connector J4: Terminal block for 596 motor
- Connector J5: Terminal block for 230Vac power supply
- Connector J6: Opening limit switch (N.C.)
- Connector J7: OPEN command (for tilting gate)
- Connector J8: Terminal block for flashing light or courtesy light
- Connector J9: Closing limit switch (N.C.)
EC Declaration of Conformity
The 596/615BPR electronic unit complies with the essential safety requirements of the following directives:
- Directive 73/23/EEC and amendments 93/68/EEC
- Directive 89/336/EEC and amendments 92/31/EEC and 93/68/EEC
Manufacturer: FAAC S.p.A. - Via Benini, 1 - 40069 Zola Predosa BOLOGNA - ITALY
Additional Notes
- Product tested in typical FAAC configuration
- FAAC reserves the right to modify the product without prior notice
- Illustrations are for reference only and are not contractual
- Specifications may change with technical updates
Component Identification
- F2: Accessory protection
- J2: Connector for radio receiver
- SW1: Programming key
- DL1: Signaling diodes
- TF1: Transformer
- F1: Motor protection 6.3A - 250V
Operation with Sensors
- When opening: immediate stop with sensor active
- When closing: 4-sec. deceleration with sensor active
- 615 mode: deceleration for half the standard time
- Without limit switches: only the configured work time applies
Time Learning
- Work time: 0-10 min (2.5 sec. steps)
- Pause time: 0-5 min (1.5 sec. steps)
- Learning process with SW1 and limit switches
- Confirmation with signaling diodes
Operation with Receivers
- J2 connector compatible with RP2 dual-channel receivers
- Single-channel RP receivers control OPEN only
- Direct OPEN and CLOSE control with remote control
LED Indicators
- DL1: Shows the selected logic by flashing
- OP-A: Command active/inactive
- CLOSE: Command active/inactive
- SAFE: Safety devices clear/engaged
- STOP: Command inactive/active
- FCA: Opening limit switch clear/engaged
- FCC: Closing limit switch clear/engaged
Pre-flash Activation/Deactivation
- Activation: Keep STOP open, press SW1 and close STOP
- Deactivation: Keep STOP open, press SW1 and close STOP
- Flashing light activates 3 seconds before movement
Operation by Logic
- EP logic: Stop halts, automatic closing
- A logic: Automatic opening after the pause time has elapsed
- P logic: Parking operation
- C logic: Operation with continuous presence
Why buy it at Ciaespinoza.com?
- Stock in Mexico: parcel shipping in 3 to 7 business days.
- Price includes VAT, no surprises at checkout.
Frequently asked questions
What is the model or part number?
390081, brand FAAC.
Does the price include VAT?
Yes, the listed price already includes VAT.
Where do you ship and how long does it take?
We ship only within Mexico, by parcel service, and orders arrive in 3 to 7 business days.
Frequently asked questions
Where do you ship and how long does it take?
We sell in Mexico and ship worldwide. Air shipping takes 15 to 30 business days and sea shipping 30 to 60 business days, depending on the destination country. Shipping time starts once the order is paid in full.
How does buying made-to-order products work?
For vending machines and made-to-order products, request a custom quote. Once you accept it, you pay a 50% deposit and manufacturing begins (usually 15 to 45 days depending on the model). When it's finished, you pay the remaining 50% and we schedule shipping. You can also pay 100% online.
Does the price include import taxes?
In Mexico, yes. Our prices are DDP: they include import taxes and duties, and you don't have to handle any customs paperwork.
In other countries, depending on the country and the case, we quote DDP (all-inclusive to your destination), DAP (delivered to destination; you handle the import), CIF (freight and insurance paid to the destination port) or FOB (loaded on board in China, for customers with their own freight forwarder and import documentation).
Do you issue invoices in Mexico?
Yes. For purchases made in Mexico you can request your invoice (CFDI) online on our invoicing page.